PFERD TOOLS conical diamond file 6x170mm D46 (fine) for particularly narrow, deep-set contours Wyjątkowa oferta

Opis

Opis:

• Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
• Diamond files and sheets are also used for processing hardened steel.
• The working temperatures are so low that no chemical wear occurs.
• This allows the higher hardness of the diamond grain to be exploited for a longer tool life.
• The conical diamond files are used in tool-making for particularly narrow, deep-set contours.
• The forged shank allows for use without an additional handle.

Cecha szcz.:

• Width, metric: 6 mm
• Grit size: D 46
• Height, tang: 2.4 mm
• Height, point: 0.5 mm
• Length, coating: 50 mm
• Length, total: 170 mm

Zastosowanie:

• Recommendations for use: Apply only slight pressure to the file, especially in workpiece edge areas. Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object. Avoid using grease!
• Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)
• Drive types: Manual application

Materiał:

• Materials that can be worked:
  • Abrasive materials
  • Case-hardened steels
  • Ferrite (magnetic material)
  • Glass
  • Graphite and synthetic carbon
  • Nickel or titanium-based superalloys
  • Steel materials with a hardness > 54 HRC
  • Technical ceramics
  • Tool steels
  • Tungsten carbide
  • Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide

  W dostawie:

  • Customer-specific tool solutions are available on request.