Wyprzedaż PFERD TOOLS Poliflex grinding block 30x60x115 mm bond PUR SIC60 for fine grinding and finishing

Opis

Opis:

• Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances.
• They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
• The rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners.
• With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.
• Poliflex fine grinding tools with the PUR bond are manufactured with green silicon carbide (SiC).
• The PUR bond is a very soft bond which is available in two hardness grades (PUR-W, PUR-MH).
• It is homogeneously interspersed with abrasive grain.
• The rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners.
• With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.

Cecha szcz.:

• Width, metric: 60 mm
• Abrasive: Silicon carbide SiC/C
• Length, metric: 115 mm
• Grit size: 60
• Height: 30 mm
• Bond: PUR

Zaleta:

• Highly flexible, enabling optimal adjustment to the contour.
• Cool and very gentle grinding thanks to open structure and elastic bond.
• Produces a fine, matt surface finish.
• Produces very good surface quality.
• High economic efficiency thanks to long tool life and high stock removal rate.

Zastosowanie:

• Recommendations for use: Depending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed. For the best results, use at a recommended cutting speed of 10-15 m/s.
• Applications: Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing)
• Drive types: Manual application

Materiał:

• Materials that can be worked:
  • Aluminium
  • Brass
  • Cast steel
  • Copper
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • Stainless steel (INOX)
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Zinc
  • Materials that can be worked: Aluminium; Brass; Cast steel; Copper; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Zinc

  W dostawie:

  • Please complete the description with the desired grit size.