Opis
Opis:
- For light deburring, cleaning of holes and cross holes and for work on surfaces.
- Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC.
- They are primarily suitable for polishing and smoothing finishes on soft metals.
- Plastic filament withstands temperatures up to 220 °C.
Cecha szcz.:
- Max. RPM: 2000 RPM
- Width, metric: 25 mm
- Mounting system: Shank
- Dia. filament material: 0.3 mm
- Dia. external, metric: 16 mm
- Dia. shank, metric: 3.7 mm
- Filament material: Aluminium oxide (AO)
- Grit size: 600
- Length, total: 125 mm
Zaleta:
- Enable maximum precision and efficiency in work on delicate workpieces.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- The dimensional accuracy of the workpieces remains unchanged.
- With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
- The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
Zastosowanie:
- Recommendations for use: Use coolant for applications where large amounts of heat are produced. Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Bronze
- Cast iron
- Cast steel
- Cobalt-based alloys
- Other non-ferrous metals
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Max. RPM: 2000 RPM
- Width, metric: 25 mm
- Mounting system: Shank
- Dia. filament material: 0.3 mm
- Dia. external, metric: 16 mm
- Dia. shank, metric: 3.7 mm
- Filament material: Aluminium oxide (AO)
- Grit size: 600
- Length, total: 125 mm
Zaleta:
- Enable maximum precision and efficiency in work on delicate workpieces.
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- The dimensional accuracy of the workpieces remains unchanged.
- With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
- The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
Zastosowanie:
- Recommendations for use: Use coolant for applications where large amounts of heat are produced. Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Bronze
- Cast iron
- Cast steel
- Cobalt-based alloys
- Other non-ferrous metals
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Recommendations for use: Use coolant for applications where large amounts of heat are produced. Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Bronze
- Cast iron
- Cast steel
- Cobalt-based alloys
- Other non-ferrous metals
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Aluminium
- Bronze
- Cast iron
- Cast steel
- Cobalt-based alloys
- Other non-ferrous metals
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
