Darmowa dostawa PFERD TOOLS Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 03×13 mm shank dia. 3 mm for stainless steel

Opis

Opis:

• With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX).
• The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels.
• It generates significantly less vibration than a comparable cross cut.
• Tree-shaped burr with radius end according to DIN 8032.
• PFERD TOOLS ERGONOMICS recommends burrs with the INOX cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
• PFERD TOOLS EFFICIENCY recommends burrs with the INOX cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Cecha szcz.:

• Radius corner design: 0.75 mm
• RPM from, hard non-ferrous metals: 27000 RPM
• RPM from, rust and acid-resistant steels: 48000 RPM
• RPM from, soft non-ferrous metals: 27000 RPM
• RPM to, hard non-ferrous metals: 48000 RPM
• RPM to, rust and acid-resistant steels: 64000 RPM
• RPM to, soft non-ferrous metals: 48000 RPM
• Cut: INOX
• Dia. external, metric: 3 mm
• Dia. shank, metric: 3 mm
• Length, cut: 13 mm
• Length, total: 43 mm

Zaleta:

• Excellent stock removal rate and tool life due to innovative tooth geometry.
• Achieves high surface qualities through optimum chip formation.
• Prevents heat discolouration in the material due to reduced heat production.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Zastosowanie:

• Recommendations for use: To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible. Observe the recommended rotational speeds. If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly. To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.
• Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
• Drive types: Flexible shaft drive; Tool machine; Automated centres; Straight grinder

Materiał:

• Materials that can be worked:
  • Hard non-ferrous metal
  • Stainless steel (INOX)
  • Titanium
  • Titanium alloys
  • Materials that can be worked: Hard non-ferrous metal; Stainless steel (INOX); Titanium; Titanium alloys