Opis
Opis:
- Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
- Diamond files and sheets are also used for processing hardened steel.
- The working temperatures are so low that no chemical wear occurs.
- This allows the higher hardness of the diamond grain to be exploited for a longer tool life.
- Diamond escapement files are used on very small shapes in tool making and precision mechanics.
- They have a forged shank which allows use without an additional handle.
- PFERD TOOLS ERGONOMICS recommends diamond escapement files to perceptibly improve comfort when working.
Cecha szcz.:
- Shape: Round
- Width, metric: 1.8 mm
- Grit size: D 91
- Length, coating: 40 mm
- Length, total: 140 mm
Zastosowanie:
- Recommendations for use: Apply only slight pressure to the file, especially in workpiece edge areas. Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object. Avoid using grease!
- Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)
- Drive types: Manual application
Materiał:
- Materials that can be worked:
- Abrasive materials
- Case-hardened steels
- Ferrite (magnetic material)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Steel materials with a hardness > 54 HRC
- Technical ceramics
- Tool steels
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide
W dostawie:
- Customer-specific tool solutions are available on request.
- Shape: Round
- Width, metric: 1.8 mm
- Grit size: D 91
- Length, coating: 40 mm
- Length, total: 140 mm
Zastosowanie:
- Recommendations for use: Apply only slight pressure to the file, especially in workpiece edge areas. Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object. Avoid using grease!
- Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)
- Drive types: Manual application
Materiał:
- Materials that can be worked:
- Abrasive materials
- Case-hardened steels
- Ferrite (magnetic material)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Steel materials with a hardness > 54 HRC
- Technical ceramics
- Tool steels
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide
W dostawie:
- Customer-specific tool solutions are available on request.
- Materials that can be worked:
- Abrasive materials
- Case-hardened steels
- Ferrite (magnetic material)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Steel materials with a hardness > 54 HRC
- Technical ceramics
- Tool steels
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide
W dostawie:
- Customer-specific tool solutions are available on request.
