Do wyczerpania zapasów PFERD TOOLS POLINOX non-woven unmounted grinding wheel PNR dia. 150×40 mm centre hole dia. 20 mm A180 for fine grinding and finishing

Opis

Opis:

• Made of several slightly wavily arranged strips of non-woven abrasive material, wound around a metal core.
• The open arrangement and high flexibility of the non-woven abrasive material enables exceptional adaptation to contours.
• This makes seamless brush matting of surfaces, profiles and pipes possible.
• PFERD TOOLS ERGONOMICS recommends POLINOX unmounted grinding wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Cecha szcz.:

• Max. RPM: 4000 RPM
• RPM, optimum: 2000 RPM
• Width, metric: 40 mm
• Dia. hole: 20 mm
• Abrasive: Aluminium oxide A
• Dia. external, metric: 150 mm
• Dia. thread: 0
• Grit size: 180

Zaleta:

• Highly flexible, enabling optimal adjustment to the contour.
• Cool grinding and low thermal load on the workpiece.
• The open structure and high flexibility of the non-woven material prevents tool clogging.

Zastosowanie:

• Recommendations for use: For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
• Applications: Cleaning; Deburring; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work
• Drive types: Bench grinder; Flexible shaft drive; Straight grinder

Materiał:

• Materials that can be worked:
  • Aluminium
  • Brass
  • Bronze
  • Cast steel
  • Cobalt-based alloys
  • Copper
  • Fibre-reinforced thermosetting plastics (GRP, CRP)
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Thermoplastics
  • Titanium
  • Titanium alloys
  • Zinc
  • Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

  W dostawie:

  • Please order compatible arbor separately.