Opis
Opis:
- For light cleaning and deburring work on threaded holes or recesses, e.
- g.
- keyways.
- Steel wire is the most common filament material.
- Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring.
- PFERD TOOLS special wire has high tensile strength and bending fatigue strength.
- This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.
- Steel wire withstands temperatures up to 300 °C.
Cecha szcz.:
- Max. RPM: 3000 RPM
- Width, metric: 25 mm
- Mounting system: Shank
- Dia. filament material: 0.12 mm
- Dia. external, metric: 25 mm
- Dia. shank, metric: 3.8 mm
- Filament material: Steel wire (ST)
- Length, total: 90 mm
Zaleta:
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Longer tool life due to the design of the stem.
- With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
- The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
- Long tool life through use of PFERD TOOLS special wire.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Thermosetting plastics
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
- Max. RPM: 3000 RPM
- Width, metric: 25 mm
- Mounting system: Shank
- Dia. filament material: 0.12 mm
- Dia. external, metric: 25 mm
- Dia. shank, metric: 3.8 mm
- Filament material: Steel wire (ST)
- Length, total: 90 mm
Zaleta:
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Longer tool life due to the design of the stem.
- With tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
- The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
- Long tool life through use of PFERD TOOLS special wire.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Thermosetting plastics
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
- Recommendations for use: Please observe the recommended rotational speeds. Use with clockwise rotation.
- Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Manual application; Power drill
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Thermosetting plastics
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
- Cast iron
- Cast steel
- Thermosetting plastics
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
