Opis
Opis:
- Steel wire is the most common filament material.
- Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring.
- PFERD TOOLS special wire has high tensile strength and bending fatigue strength.
- This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.
- Steel wire withstands temperatures up to 300 °C.
- Aggressive and robust brush that is able to withstand high mechanical loads.
- Suitable for all heavy-duty stationary and automated brushing, e.
- g.
- deburring work.
Cecha szcz.:
- Number, knots: 34 pcs.
- Packaging: Industrial packaging
- Max. RPM: 8500 RPM
- RPM, optimum, from: 4000 RPM
- RPM, optimum, to: 6500 RPM
- Width, metric: 16 mm
- Mounting system: Centre hole
- Dia. hole: 50.8 mm
- Dia. filament material: 0.5 mm
- Dia. external, metric: 200 mm
- Dia. thread: –
- Filament material: Steel wire (ST)
- Length, filament: 44 mm
Zaleta:
- Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
- Aggressive brushing effect due to the very stiff wire knots.
- Long tool life through use of PFERD TOOLS special wire.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Automated centres; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Number, knots: 34 pcs.
- Packaging: Industrial packaging
- Max. RPM: 8500 RPM
- RPM, optimum, from: 4000 RPM
- RPM, optimum, to: 6500 RPM
- Width, metric: 16 mm
- Mounting system: Centre hole
- Dia. hole: 50.8 mm
- Dia. filament material: 0.5 mm
- Dia. external, metric: 200 mm
- Dia. thread: –
- Filament material: Steel wire (ST)
- Length, filament: 44 mm
Zaleta:
- Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.
- Aggressive brushing effect due to the very stiff wire knots.
- Long tool life through use of PFERD TOOLS special wire.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Automated centres; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Recommendations for use: Please observe the recommended rotational speeds.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Automated centres; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
