Opis
Wykonanie:
- Hardness H
Opis:
- Compatible holder for cylindrical abrasive spiral bands.
- In ISO 15637-1, cylindrical rubber drum holders are designated as ″holding fixtures of cylindrical abrasive sleeves″.
- Rubber drum holders marked ″H″ are the harder type and permit grinding at higher contact pressure.
- They are exceptionally well-suited to work on weld seams.
Cecha szcz.:
- PFERD TOOLS type: GK
- Max. RPM: 19100 RPM
- RPM, min.: 13000 RPM
- Version: Hardness H
- Width, metric: 30 mm
- Acc. to ISO: ISO 15637-1
- Dia. external, metric: 30 mm
- Dia. shank, metric: 6 mm
- Hardness: 80
- Length, shank: 35 mm
Zaleta:
- The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
- Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
- Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
Zastosowanie:
- Recommendations for use: To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive. To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder. For the best results, use at a recommended cutting speed of 20-30 m/s.
- Drive types: Flexible shaft drive; Straight grinder
- Compatible holder for cylindrical abrasive spiral bands.
- In ISO 15637-1, cylindrical rubber drum holders are designated as ″holding fixtures of cylindrical abrasive sleeves″.
- Rubber drum holders marked ″H″ are the harder type and permit grinding at higher contact pressure.
- They are exceptionally well-suited to work on weld seams.
Cecha szcz.:
- PFERD TOOLS type: GK
- Max. RPM: 19100 RPM
- RPM, min.: 13000 RPM
- Version: Hardness H
- Width, metric: 30 mm
- Acc. to ISO: ISO 15637-1
- Dia. external, metric: 30 mm
- Dia. shank, metric: 6 mm
- Hardness: 80
- Length, shank: 35 mm
Zaleta:
- The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
- Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
- Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
Zastosowanie:
- Recommendations for use: To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the tool drive. To ensure the abrasive spiral band is securely attached, adhere to the minimum speed for the rubber drum holder. For the best results, use at a recommended cutting speed of 20-30 m/s.
- Drive types: Flexible shaft drive; Straight grinder
- The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use.
- Excellent tool life due to special manufacturing process – even under the most demanding operating conditions.
- Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality.
