Najlepsza cena PFERD TOOLS COMBIDISC ceramic oxide grain mini fibre disc CDFR dia. 50 mm CO-COOL80 for steel and stainless steel

Opis

Opis:

• Exceptionally well-suited to surface and edge grinding.
• The fibre backing strengthens the abrasive disc and improves stock removal.
• For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
• Consistently high performance due to self-sharpening ceramic oxide grain.
• Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
• The CDR clamping system has a threaded connection with male thread (plastic) on the tool side.
• Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
• PFERD TOOLS ERGONOMICS recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust produced during use and to improve comfort when working.
• PFERD TOOLS EFFICIENCY recommends COMBIDISC tools to reduce tool changing and setting-up time.

Cecha szcz.:

• Clamping system: CDR system
• RPM, optimum, from: 3800 RPM
• RPM, optimum, to: 13000 RPM
• Abrasive: CO-COOL
• Dia. external, metric: 50 mm
• Grit size: 80

Zaleta:

• High economic efficiency as tool can be changed quickly.
• Very comfortable due to ease of use and low-vibration working.
• No disruptions in use due to adhesion, slipping or coming loose.

Zastosowanie:

• Recommendations for use: Use COMBIDISC mini fibre discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders. Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
• Applications: Deburring; Step-by-step fine grinding; Leveling; Roughening; Sharpening; Surface work; Work on weld seams; Working on edges
• Drive types: Angle grinder; Cordless angle grinder; Flexible shaft drive; Straight grinder

Materiał:

• Materials that can be worked:
  • Aluminium
  • Annealed cast iron
  • Bronze
  • Cobalt-based alloys
  • Grey/nodular cast iron (GG/GJL, GGG/GJS)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Titanium
  • Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium

  W dostawie:

  • Please order abrasive disc holder separately.