Opis
Opis:
- The set contains six HSS hole saws in the most common diameters, including accessories, for plumbers and sanitary engineers.
- It is supplied in a well-arranged plastic box which protects against dirt and damage.
- Operating instructions are included.
- It is possible to use hole saw LS 38 with the LSA adapter and washer.
- The Allen key, 4 mm and the ejection spring are only available in a set and not individually.
Cecha szcz.:
- PFERD TOOLS type: LS-SO 9 I
- Width, metric: 260 mm
- Length, metric: 310 mm
- Height: 80 mm
Zaleta:
- Cost-effective sawing of round cut-outs.
- Chattering during sawing is prevented by the alternating tooth pitch.
- High concentricity.
- Good chip removal.
- The hole saw is conveniently centred and guided via the replaceable HSS pilot drill.
Zastosowanie:
- Recommendations for use: Observe the recommended rotational speeds. Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8″) over the teeth of the hole saw. When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil. HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.). Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing. Avoid overheating the tool.
- Applications: Cutting out holes; Drilling
- Drive types: Column drill; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Hard non-ferrous metal
- Plastics
- Stainless steel (INOX)
- Steel, cast steel
- Materials that can be worked: Aluminium; Hard non-ferrous metal; Plastics; Stainless steel (INOX); Steel, cast steel
- PFERD TOOLS type: LS-SO 9 I
- Width, metric: 260 mm
- Length, metric: 310 mm
- Height: 80 mm
Zaleta:
- Cost-effective sawing of round cut-outs.
- Chattering during sawing is prevented by the alternating tooth pitch.
- High concentricity.
- Good chip removal.
- The hole saw is conveniently centred and guided via the replaceable HSS pilot drill.
Zastosowanie:
- Recommendations for use: Observe the recommended rotational speeds. Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8″) over the teeth of the hole saw. When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil. HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.). Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing. Avoid overheating the tool.
- Applications: Cutting out holes; Drilling
- Drive types: Column drill; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Hard non-ferrous metal
- Plastics
- Stainless steel (INOX)
- Steel, cast steel
- Materials that can be worked: Aluminium; Hard non-ferrous metal; Plastics; Stainless steel (INOX); Steel, cast steel
- Recommendations for use: Observe the recommended rotational speeds. Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 3 mm (1/8″) over the teeth of the hole saw. When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminium, use kerosene instead of cutting oil. HSS hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.). Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing. Avoid overheating the tool.
- Applications: Cutting out holes; Drilling
- Drive types: Column drill; Power drill
Materiał:
- Materials that can be worked:
- Aluminium
- Hard non-ferrous metal
- Plastics
- Stainless steel (INOX)
- Steel, cast steel
- Materials that can be worked: Aluminium; Hard non-ferrous metal; Plastics; Stainless steel (INOX); Steel, cast steel
- Aluminium
- Hard non-ferrous metal
- Plastics
- Stainless steel (INOX)
- Steel, cast steel
- Materials that can be worked: Aluminium; Hard non-ferrous metal; Plastics; Stainless steel (INOX); Steel, cast steel
