PFERD TOOLS ceramic oxide grain abrasive belt BA 75x2500mm CO-COOL36 for grinding stainless steel with a belt grinder Zamów teraz

Opis

Opis:

• For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well.
• Consistently high performance due to self-sharpening ceramic oxide grain.
• Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
• Long belts are compatible with commonly available belt grinders.
• In ISO 2976, they are listed under the designation ″abrasive belts″.

Cecha szcz.:

• Width, metric: 75 mm
• Abrasive: CO-COOL
• Length, metric: 2500 mm
• Acc. to ISO: ISO 2976
• Grit size: 36

Zaleta:

• High tear strength with optimum flexibility.
• Consistent results through very good grain adhesion.
• High economic efficiency due to high abrasive performance and long tool life.

Zastosowanie:

• Recommendations for use: Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
• Applications: Deburring; Step-by-step fine grinding; Leveling; Sharpening; Work on weld seams; Working on edges
• Drive types: Belt grinders and belt arms

Materiał:

• Materials that can be worked:
  • Aluminium
  • Annealed cast iron
  • Bronze
  • Cobalt-based alloys
  • Grey/nodular cast iron (GG/GJL, GGG/GJS)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Titanium
  • Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium