PFERD TOOLS Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.20 stationary Tylko dziś

Opis

Opis:

• Particularly suitable for deburring pipes, cut edges and small parts on stationary machines.
• In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.
• 4310/1.
• 4301 (V2A) for all INOX brushes.
• Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life.
• All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A.
• The wire quality 1.
• 4310/1.
• 4301 tends to become ferromagnetic in the case of cold working; i.
• e.
• it can be attracted using magnets.
• ;The reason for this is a change in the microstructure caused by deformation (e.
• g.
• during the wire drawing process).
• This does not have any impact on the quality and corrosion resistance of the INOX filament.
• The filament is still resistant to corrosion.
• Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Cecha szcz.:

• Max. RPM: 3600 RPM
• RPM, optimum, from: 1400 RPM
• RPM, optimum, to: 2300 RPM
• Width, metric: 60 mm
• Mounting system: Centre hole
• Dia. hole, max.: 100 mm
• Dia. hole: 50.8 mm
• Dia. filament material: 0.2 mm
• Dia. external, metric: 250 mm
• Filament material: Stainless steel wire (INOX)
• Length, filament: 50 mm

Zaleta:

• Individual check for imbalance guarantees smooth running.
• Maximum tool life thanks to high filament density.
• Very good corrosion resistance.
• Creates fine surfaces.

Zastosowanie:

• Recommendations for use: Please observe the recommended rotational speeds.
• Applications: Cleaning; Deburring; Derusting; Removing heat discolouration; Removing oxide layers; Paint stripping; Roughening
• Drive types: Automated centres

Materiał:

• Materials that can be worked:
  • Aluminium
  • Bronze
  • Cobalt-based alloys
  • Hard non-ferrous metal
  • High-temperature-resistant materials
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Nickel or titanium-based superalloys
  • Other non-ferrous metals
  • Soft titanium alloys (tensile strength 500 N/mm²)
  • Stainless steel (INOX)
  • Titanium
  • Titanium alloys
  • Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

  W dostawie:

  • Please order adapter pairs APM 50.8 separately.