Opis
Opis:
- Particularly aggressive brushing effect for heavy-duty brushing.
- With plastic-bonded brushes, the filament material is bonded in an elastic plastic mass.
- In comparison to non-plastic-bonded brushes, the brushing effect is considerably more aggressive with limited flexibility.
- Brushes with encapsulated steel wire are available in different versions.
- The hardness determines the applicable brushing effect.
- For general use.
- Aggressive enough for most applications.
- The filament material of this brush is a brass-plated steel wire.
- Colour: green
Cecha szcz.:
- Max. RPM: 15000 RPM
- RPM, optimum, from: 7500 RPM
- RPM, optimum, to: 11300 RPM
- Width, metric: 7 mm
- Mounting system: Shank
- Dia. filament material: 0.3 mm
- Dia. external, metric: 63 mm
- Dia. shank, metric: 6 mm
- Filament material: Steel wire (ST)
- Length, filament: 20 mm
- Length, total: 40 mm
Zaleta:
- Focused working thanks to high dimensional stability.
- Maximum tool life as premature wire breakage is prevented.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Max. RPM: 15000 RPM
- RPM, optimum, from: 7500 RPM
- RPM, optimum, to: 11300 RPM
- Width, metric: 7 mm
- Mounting system: Shank
- Dia. filament material: 0.3 mm
- Dia. external, metric: 63 mm
- Dia. shank, metric: 6 mm
- Filament material: Steel wire (ST)
- Length, filament: 20 mm
- Length, total: 40 mm
Zaleta:
- Focused working thanks to high dimensional stability.
- Maximum tool life as premature wire breakage is prevented.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Derusting; Descaling; Removing oxide layers; Paint stripping; Root seam processing; Work on weld seams; Work on fillet welds
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Materiał:
- Materials that can be worked:
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
- Cast iron
- Cast steel
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
