PFERD TOOLS long end brush crimped PBUL dia. 10 mm shank dia. 6 mm steel wire dia. 0.30 Najlepsza cena

Opis

Opis:

• Suitable for light brushing such as deburring, cleaning and derusting.
• Particularly long version to access deep areas.
• Steel wire is the most common filament material.
• Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring.
• PFERD TOOLS special wire has high tensile strength and bending fatigue strength.
• This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.
• Steel wire withstands temperatures up to 300 °C.

Cecha szcz.:

• Max. RPM: 20000 RPM
• RPM, optimum, from: 4000 RPM
• RPM, optimum, to: 9500 RPM
• Mounting system: Shank
• Dia. cup: 10 mm
• Dia. filament material: 0.3 mm
• Dia. external, metric: 10 mm
• Dia. shank, metric: 6 mm
• Filament material: Steel wire (ST)
• Length, filament: 20 mm
• Length, total: 120 mm

Zaleta:

• Optimal access to hard-to-reach areas.
• Long tool life through use of PFERD TOOLS special wire.
• Creates fine surfaces.

Zastosowanie:

• Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
• Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
• Drive types: Flexible shaft drive; Power drill; Straight grinder

Materiał:

• Materials that can be worked:
  • Cast iron
  • Cast steel
  • Thermosetting plastics
  • Elastomers
  • Steel, cast steel
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Thermoplastics
  • Wood
  • Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood