Promocja!
PFERD TOOLS POLINOX non-woven grinding drum PNL dia. 100x100 mm keyway 19 mm A100 for fine grinding and finishing Dostępne od ręki

PFERD TOOLS POLINOX non-woven grinding drum PNL dia. 100×100 mm keyway 19 mm A100 for fine grinding and finishing Dostępne od ręki

Pierwotna cena wynosiła: 281,53 zł.Aktualna cena wynosi: 112,61 zł.

Bezpieczna i gwarantowana płatność

Akceptowane metody płatności
  • Darmowa i szybka dostawa od 249,00 zł
  • 14 dni na zwrot i zwrot środków
  • Bezpieczne płatności z szyfrowaniem SSL
SKU: SK0029631-PL20260529-100517 Kategoria:

Opis

Opis:

  • POLINOX grinding drums are especially well suited to work on large surfaces.
  • The non-woven abrasive flaps are arranged radially.
  • A long tool life is achieved through the very dense packing of the flaps.
  • PFERD TOOLS ERGONOMICS recommends POLINOX grinding drums to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Cecha szcz.:

  • Max. RPM: 4800 RPM
  • RPM, optimum: 2500 RPM
  • Width, metric: 100 mm
  • Dia. hole: 19 mm
  • Abrasive: Aluminium oxide A
  • Dia. external, metric: 100 mm
  • Grit size: 100

Zaleta:

  • Long tool life thanks to tightly packed flaps.
  • Cool grinding and low thermal load on the workpiece.
  • The open structure and high flexibility of the non-woven material prevents tool clogging.

Zastosowanie:

  • Applications: Cleaning; Deburring; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work
  • Drive types: Drum grinders

Materiał:

  • Materials that can be worked:
    • Aluminium
    • Brass
    • Bronze
    • Cast steel
    • Cobalt-based alloys
    • Copper
    • Fibre-reinforced thermosetting plastics (GRP, CRP)
    • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
    • Nickel-based alloys (e.g. Inconell and Hastelloy)
    • Stainless steel (INOX)
    • Steel materials with a hardness > 54 HRC
    • Steels up to 1,200 N/mm² (< 38 HRC)
    • Thermoplastics
    • Titanium
    • Titanium alloys
    • Zinc
    • Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

    W dostawie:

    • The 19 mm hole diameter with 4 keyways fits all conventional drum grinders.

Podobne produkty