PFERD TOOLS Tungsten carbide burr set 1512 cut 3 5-piece PLUS shank dia. 6 mm univ. medium cross cut Ostatnie sztuki

Opis

Opis:

• Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys.
• It is characterized by its high stock removal rate.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing.
• They provide a good stock removal rate and are not specific to a particular material.
• Set 1512 – cut 3 PLUS – contains five tungsten carbide burrs in the most common shapes and dimensions for applications in the workshop.
• The sturdy plastic box protects the tools from dirt and damage.
• The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools.
• Five further unused slots are available for other burrs.

Cecha szcz.:

• PFERD TOOLS type: 1512 Z3PLUS
• Cut: 3 PLUS
• Dia. shank, metric: 6 mm

Zaleta:

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Zastosowanie:

• Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
• Drive types: Flexible shaft drive; Tool machine; Robot; Stationary machines; Straight grinder

Materiał:

• Materials that can be worked:
  • Annealed cast iron
  • Black annealed cast iron (GTS, GJMB)
  • Case-hardened steels
  • Cast iron
  • Cast steel
  • Cobalt-based alloys
  • Grey/nodular cast iron (GG/GJL, GGG/GJS)
  • Hard aluminium alloys
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • High-temperature-resistant materials
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Steel
  • Steel, cast steel
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Steels over 700 N/mm² (> 220 HB)
  • Steels up to 700 N/mm² (< 220 HB)
  • Tool steels
  • White annealed cast iron (GTW, GJMW)
  • Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels over 700 N/mm² (> 220 HB); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)