Opis
Opis:
- Flat tungsten carbide files for working on flat and convex surfaces.
- These tungsten carbide files are delivered in industrial packaging without tungsten carbide file holders.
- Rectangular file, convex in transverse direction, cut on two sides, one of which has chip dividers.
Cecha szcz.:
- PFERD TOOLS type: HMF 5010
- Chip divider: 1 side without, 1 side with
- Teeth per cm: 6.5
- Width, metric: 5 mm
- Length, metric: 50 mm
- Height: 10 mm
Zaleta:
- The best results thanks to radial and convex cut pattern.
Zastosowanie:
- Recommendations for use: Tungsten carbide files can be resharpened. Tungsten carbide files with chip dividers are suitable for achieving a high stock removal rate.
- Drive types: Manual application
Materiał:
- Materials that can be worked:
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steels up to 1,200 N/mm² (< 38 HRC)
- PFERD TOOLS type: HMF 5010
- Chip divider: 1 side without, 1 side with
- Teeth per cm: 6.5
- Width, metric: 5 mm
- Length, metric: 50 mm
- Height: 10 mm
Zaleta:
- The best results thanks to radial and convex cut pattern.
Zastosowanie:
- Recommendations for use: Tungsten carbide files can be resharpened. Tungsten carbide files with chip dividers are suitable for achieving a high stock removal rate.
- Drive types: Manual application
Materiał:
- Materials that can be worked:
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steels up to 1,200 N/mm² (< 38 HRC)
- Recommendations for use: Tungsten carbide files can be resharpened. Tungsten carbide files with chip dividers are suitable for achieving a high stock removal rate.
- Drive types: Manual application
Materiał:
- Materials that can be worked:
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steels up to 1,200 N/mm² (< 38 HRC)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steels up to 1,200 N/mm² (< 38 HRC)
