PFERD TOOLS Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT Darmowy zwrot

Opis

Opis:

• The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys.
• This increases the tool life and improves the surface quality of the workpiece.
• Conical burr with round radius end according to DIN 8032.
• PFERD TOOLS EFFICIENCY recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Cecha szcz.:

• Radius corner design: 2.6 mm
• RPM from, hard non-ferrous metals: 16000 RPM
• RPM from, soft non-ferrous metals: 16000 RPM
• RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 16000 RPM
• RPM to, hard non-ferrous metals: 34000 RPM
• RPM to, soft non-ferrous metals: 34000 RPM
• RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 34000 RPM
• Cut: ALU HC-NFE
• Dia. external, metric: 12 mm
• Dia. shank, metric: 6 mm
• Angle: 14 °
• Length, cut: 30 mm
• Length, total: 70 mm

Zaleta:

• Mainly used for long-chipping and lubricating non-ferrous metals.
• Maximum stock removal rate.
• Effective chip removal through improved anti-adhesion characteristics.
• Lower thermal loads.
• Increased tool life.

Zastosowanie:

• Recommendations for use: To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible. Observe the recommended rotational speeds. If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly. To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
• Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
• Drive types: Flexible shaft drive; Tool machine; Automated centres; Straight grinder

Materiał:

• Materials that can be worked:
  • Aluminium
  • Brass
  • Bronze
  • Copper
  • Fibre-reinforced thermosetting plastics (GRP, CRP)
  • Hard aluminium alloys
  • Hard non-ferrous metal
  • Plastics
  • Soft aluminium alloys
  • Soft non-ferrous metal
  • Thermoplastics
  • Tough aluminium alloys
  • Zinc
  • Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc