Zamów teraz PFERD TOOLS compressed-air turbo angle grinder PWT 26/85 HV M14 for dia. 180mm 8,500 RPM/2,600 watts

Opis

Opis:

• Turbine motors perform consistently well in high rotational speed ranges.
• The compressed-air angle grinder with turbine motor has a threaded tool mounting for tools with female threads or flange mounting.
• The exhaust air flow of the air grinder is at the bottom.
• The air grinder with integrated centrifugal governor must only be used without oil.
• Due to the lever valve, the drive has a dead man’s switch.
• 1/2″ female connecting thread, 2 keys (1x item no.
• 91244601, 1x item no.
• 92785503), 2 clamping nuts (1x item no.
• 90011450, 1x item no.
• 90011451), 3 clamping flanges (1x item no.
• 90011456, 1x item no.
• 90011457, 1x item no.
• 90011458), guard dia.
• 150 mm, anti-vibration handle.
• PFERD TOOLS ERGONOMICS recommends the drive because it improves comfort when working, and the oil-free use ensures fewer emissions.
• PFERD TOOLS EFFICIENCY recommends the drive for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Cecha szcz.:

• Operating pressure: 6.3 bar
• Power output without oil: 2600 watts
• Rotational speed without oil: 8500 RPM
• Throttle type: Lever
• Width, metric: 40 mm
• Air consumption, at idle: 0.9 m³/min
• Air consumption, under load: 2.25 m³/min
• Length, metric: 295 mm
• Net weight: 2.8 kg
• Air supply hose internal dia.: 16 mm
• Dia. thread: M14
• Dia. tool mounting: 22.23 mm
• Exhaust direction: bottom
• Height: 97 mm

Zaleta:

• The drive is powerful.
• Thanks to its threaded mounting, the drive is ideal for the recommended tools with female thread or flange mounting.
• Thanks to its threaded mounting, the drive is ideal for the recommended tools with female thread or flange mounting. Max. tool diameter up to 180 mm.
• Its integrated centrifugal governor enables a constant rotational speed to be maintained during use.
• Spindle lock pin for tool change with one key.