Opis
Opis:
- The broad range Performance Line SG offers a high-performance tool solution for every application and every material.
- Performance Line SG tools achieve optimum results with maximum economic efficiency.
- POLIFAN flap disc specifically designed for stainless steel (INOX) with ultra-cool grinding.
- Due to the ceramic oxide grain CO with active grinding and cooling special coating (FREEZE), there is no heat discolouration (even in sub-optimal thermal conditions), so no reworking is required.
- PFERD TOOLS ERGONOMICS recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust produced during use and to perceptibly improve comfort when working.
- PFERD TOOLS EFFICIENCY recommends POLIFAN flap discs to achieve perfect results as quickly as possible.
Cecha szcz.:
- Max. RPM: 12200 RPM
- Shape: PFC / B / T29
- Mounting system: Centre hole
- Dia. hole: 22.23 mm
- Abrasive: CO-FREEZE
- Dia. external, metric: 125 mm
- Grit size: 36
Zaleta:
- The FREEZE coating significantly reduces heat build-up in the workpiece compared with standard flap discs.
- Fast work progress and high economic efficiency thanks to the aggressive stock removal rate.
- Maximum aggressiveness over the entire tool life.
- Fewer tool changes due to the excellent tool life.
- The usual flying sparks are minimized. Damage to stainless steel workpieces from flying glowing sparks is therefore almost entirely ruled out.
Zastosowanie:
- Recommendations for use: Even during the first use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an exceptional wear pattern after just a few seconds. The highly effective fillers form a shiny cooling film on the flaps (no ″vitrification″). This provides the basis for ultra-cool grinding.
- Applications: Step-by-step fine grinding; Surface grinding; Work on weld seams
- Drive types: Angle grinder
Materiał:
- Materials that can be worked:
- Cobalt-based alloys
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Stainless steel (INOX)
- Materials that can be worked: Cobalt-based alloys; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Stainless steel (INOX)
- Max. RPM: 12200 RPM
- Shape: PFC / B / T29
- Mounting system: Centre hole
- Dia. hole: 22.23 mm
- Abrasive: CO-FREEZE
- Dia. external, metric: 125 mm
- Grit size: 36
Zaleta:
- The FREEZE coating significantly reduces heat build-up in the workpiece compared with standard flap discs.
- Fast work progress and high economic efficiency thanks to the aggressive stock removal rate.
- Maximum aggressiveness over the entire tool life.
- Fewer tool changes due to the excellent tool life.
- The usual flying sparks are minimized. Damage to stainless steel workpieces from flying glowing sparks is therefore almost entirely ruled out.
Zastosowanie:
- Recommendations for use: Even during the first use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an exceptional wear pattern after just a few seconds. The highly effective fillers form a shiny cooling film on the flaps (no ″vitrification″). This provides the basis for ultra-cool grinding.
- Applications: Step-by-step fine grinding; Surface grinding; Work on weld seams
- Drive types: Angle grinder
Materiał:
- Materials that can be worked:
- Cobalt-based alloys
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Stainless steel (INOX)
- Materials that can be worked: Cobalt-based alloys; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Stainless steel (INOX)
- Recommendations for use: Even during the first use of the POLIFAN CO-FREEZE SG INOX, the flaps exhibit an exceptional wear pattern after just a few seconds. The highly effective fillers form a shiny cooling film on the flaps (no ″vitrification″). This provides the basis for ultra-cool grinding.
- Applications: Step-by-step fine grinding; Surface grinding; Work on weld seams
- Drive types: Angle grinder
Materiał:
- Materials that can be worked:
- Cobalt-based alloys
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Stainless steel (INOX)
- Materials that can be worked: Cobalt-based alloys; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Stainless steel (INOX)
- Cobalt-based alloys
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Stainless steel (INOX)
- Materials that can be worked: Cobalt-based alloys; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Stainless steel (INOX)
