Zniżka PFERD TOOLS POLINOX non-woven hand pads PVSK 150×225 mm aluminium oxide A280 for fine grinding and finishing

Opis

Opis:

• Suitable for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces.
• Achieve matt and satin-finished surfaces.
• Highly open structure.

Cecha szcz.:

• Colour code: –
• Width, metric: 150 mm
• Abrasive: Aluminium oxide A
• Length, metric: 225 mm
• Grit size: 280

Zaleta:

• Highly flexible, enabling optimal adjustment to the contour.
• Hard-to-reach areas can be accessed.

Zastosowanie:

• Recommendations for use: Cut to the necessary size if required.
• Applications: Cleaning; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work
• Drive types: Manual application

Materiał:

• Materials that can be worked:
  • Aluminium
  • Brass
  • Bronze
  • Cast steel
  • Cobalt-based alloys
  • Copper
  • Fibre-reinforced thermosetting plastics (GRP, CRP)
  • Grey/nodular cast iron (GG/GJL, GGG/GJS)
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Stone
  • Thermoplastics
  • Titanium
  • Titanium alloys
  • Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Stone; Thermoplastics; Titanium; Titanium alloys